Walk through Sanitizing Disinfection Tunnel

This product is equipped with the main power switch. The equipment must be placed in balance, added with enough disinfectant, connected to the power supply, and the main power switch must be turned on before normal use. This product is modular designed, so the disinfectant atomization system, display system, ID card sensing system and other systems can be turned on or off independently. When there is no epidemic, the disinfectant atomization system can be turned off, and it can be used for access control management or attendance checking of visiting guests. It has the function of automatic registration of visitors.

Replenish and atomize

When using atomization and disinfection function, please follow professional guidance according to different epidemic situations, allocate disinfectant, and add disinfectant in proportion to the tank at the top of the equipment. When the disinfectant at the top of the equipment is used up, the atomization system automatically stops the protection. Please turn off the power in time, and add the dispensed disinfectant to the tank through the pump, then the atomization system will return to normal operation. Replenishing method: connect the pump connector with the filling port, start the pump and add the disinfectant to the required amount, and stop filling when the disinfectant returns at overflow port.

Entry Mode selection

A. For face recognition, there is voice prompt when measuring temperature, if the temperature is in abnormal range, the green indicator will light up or the door lock will open, and the atomization and disinfection system automatically opens, the person can pass normally (to enable face recognition, the person’s photo must be uploaded to the system in advance).

B. For face recognition by ID card, there is voice prompt when measuring temperature, if all the information is normal, the green indicator will light up or the door lock will open, the atomization and disinfection system automatically opens, the person can pass normally.

C. For dialing dynamic code, there is voice prompt when measuring temperature, if the temperature and all the information are normal, the green indicator will light up or the door lock will open, the atomization and disinfection system automatically opens, the person can pass normally. After recognized by the equipment and proved temperature is normal, the person can pass after the door opens or the green indicator lights up; if the person's temperature is abnormal or he/ she is not recognized by the equipment, the red indicator will light up, the system will buzz, capture the person and send it to the management representative.

Delivery instructions

During delivery, the liquid in the tank must be emptied. To move the equipment in a small area, lift it on the flat ground first, put the pulleys at the bottom of the feet, then carefully push it in the desired direction. When moving, the liquid on the equipment shall not excess 10% of the total capacity, please avoid shaking, which can cause the equipment to dump. The tilt of the equipment shall not be greater than 30°.